Honma TW747 P Irons

Product image 1Honma TW747 P Irons
Product image 2Honma TW747 P Irons
Product image 3Honma TW747 P Irons
Product image 4Honma TW747 P Irons
Product image 5Honma TW747 P Irons
Product image 6Honma TW747 P Irons
Product image 7Honma TW747 P Irons
Product image 8Honma TW747 P Irons
Product image 9Honma TW747 P Irons
Product image 10Honma TW747 P Irons

Regular price €1.080,00

The TW747 series is a milestone for the renowned manufacturer from Japan. With the TW747 P they offer an iron that was developed especially for players who need more length and forgiveness at the same time. The 20g tungsten insert in the sole of the head helps. This shifts the weight far downwards and makes it easier to achieve higher ball flights.

Standard iron set is from 5-PW. Iron 4 can be added on top if needed. Left-handed versions available. Get in touch with us for more details.

Please keep in mind that when you select a longer shaft than standard a custom Honma order is required. Meaning that Honma has to do the customization, not ExactGolf. And this requires about 8 weeks of additional shipping time. This is not the case for all other customizations and also not for shorter shafts.

Buy Honma's TW747 P iron online

When buying a golf club online, you should be aware of the specifications you need. We are always there for you via email, live chat or phone. Just click on the small bubble in the lower right corner and get in touch with us.

But if you are someone who already knows your way around it is quite possible that you don't need any advice at all. Or maybe just the absolute details. You can be sure that we will only supply you with high quality and exactly fitting clubs. That much is already certain.

Let's take a look at the individual specifications you can choose from:

Set size:

The TW747 P is usually offered by 5-PW. That means the set starts with iron 5 and goes up to iron 10 a.k.a pitching wedge. So what you still need are clubs for longer distances than a 5 iron and more wedges, at least a sand wedge.

You can also use the TW747 P from iron 4. When you do this you usually have a 19 or 21 degree hybrid and a 15-18 degree loft fairway wood in the bag.

For players with medium and high handicaps, it's usually a good idea to go as low as 5 iron and then put an extra hybrid in the bag. If you only need a set from iron 6 on, please contact us - this is no problem either.

Shafts offered:

Honma is one of the very few manufacturers who look extremely closely at their shafts. Most other manufacturers don't care and offer all shafts on the market. That means: if you order a Honma club from us you will only get an absolutely high quality shaft.

With the TW747 P you have the choice between the Nippon NS Pro 950 and the own brand of Honma: the Vizard. Each in regular and stiff flex. The NS Pro 950 is an excellent steel shaft. That means rather heavy and hard. The Vizard is one of the best graphite shafts available. It gives an incredibly soft feel at impact and is much lighter. If you are a beginner and have low swing speeds you should definitely prefer this shaft.

But again you can contact us at any time and inquire.

Shaft length:

The shaft length is given as standard and differs minimally from set to set. One manufacturer makes his 6 iron a few mm longer than the other, and so on. If you are normally tall and have no noticeable swing, you will have no problem with the standard length. But if you are larger than 180cm, you might want to make adjustments. Conversely, if you are smaller than 170cm, it may be a good idea to choose a shorter shaft.

But be careful: if you order a shorter shaft, you will not be able to undo it. The other way round you can. If you notice, for example, that the club is too long, you can shorten it at any time. To do this, remove the grip, cut off the shaft and glue the grip back onto it.

Also here you should contact us if you are unsure.

Lie:

The Lie depends essentially on the body size. If you are taller you tend to need an "upright" Lie and should consider 1 or 2 degrees "up". Conversely, if you are a small player, you may want to choose a flatter adjustment, i.e. "down".

But it also depends on your swing plane. For example, if you are close to the ball and/or swing relatively steeply, an "up" adjustment can be useful. Conversely, with a flat swing plane a "down" adjustment can be useful.

You must not underestimate the lie, it can strongly influence the flight of your ball. But don't worry: the lie can also be adjusted afterwards. But only with irons made of Japanese quality steel. You can't buy anything else from ExactGolf anyway. This means that we can change the lie as often as you like without any problems.

Grip Strength

This depends mainly on the length of your fingers and of course whether you feel like holding a baseball bat or a pen in your hand. In front of "normal" sized hands the standard grip or regular is sufficient. 1 additional tape doesn't make much difference, but it increases the standard grip a bit. Midsize is ultimately a rather thick grip that should only be played with very large hands.

Honma TW747 P: Club Data

  #4 #5 #6 #7 #8 #9 PW
Loft (°) 19 21.5 25 28.5 33 38 43.5
Lie (°) 60 60.5 61 61.5 62 62.5 63
Face Progression (mm) 3.25 3.25 3.75 3.75 3.75 4.25 4.25
Width of Sole (mm) 23 23.5 23.5 24 24.5 24.5 25
Head weight (g) 248 255 261 268 275 283 290
Length Vizard Shaft (inch) 38.75 38.25 37.75 37.25 36.75 36.25 35.75
Length NS Pro 950 (inch) 38.5 38 37.5 37 36.5 36 35.5
Swing weight Vizard - R D-0
D-0
D-0
D-0
D-0
D-0
D-0
Shaft weight Vizard - R 57.5g
57.5g
57.5g
57.5g
57.5g
57.5g
57.5g
Swing weight Vizard - S
D-1
D-1
D-1
D-1
D-1
D-1
D-1
Shaft weight Vizard - S 63.5g
63.5g
63.5g
63.5g
63.5g
63.5g
63.5g
Swing weight NS Pro - R+S D-2
D-2
D-2
D-2
D-2
D-2
D-2
Shaft weight NS Pro - R 94.5g
94.5g
94.5g
94.5g
94.5g
94.5g
94.5g
Shaft weight NS Pro - S
98g
98g
98g
98g
98g
98g
98g

Honma custom iron shafts for TWorld

We are listing all the available iron shafts for the TWorld series. If you cannot configure them on the right it means this order is a Honma custom production meaning that Honma assembles your order in Japan - and this takes 8-10 weeks. If you want to order a set with these shafts please get in touch through live chat, email or phone.

True Temper Models Flexes Kick-Point
Dynamic Gold AMT R300, S200, S300, S400, X100 High
AMT Red R300, S200 Low-mid
AMT Black R300, S200 Mid
AMT Tour White R300, S200, X100 High
Dynamic Gold 
R300, S200, S300, S400, X100
High
Dynamic Gold Tour S200, X100 High
Dynamic Gold 95 R300, S200 High-mid
Dynamic Gold 105 R300, S200, X100 High
Dynamic Gold 120 R300, S200, X100 High
XP 95 R300, S200 Low-mid
KBS Models Flexes Kick-Point
KBS Tour R, R+, S, S+, X Mid
KBS Tour-FLT
R, R+, S, S+, X
-
KBS Tour 105
R, S, X -
KBS Tour 90
R, S Low
KBS Tour $-Taper
R, R+, S, S+, X
-
KBS Tour C-Taper
R, R+, S, S+, X
High-mid
KBS Tour C-Taper 95
R, S, X -
KBS Hi-Rev
R, S, X
Low-mid
KBS-Tour-V
R, S, X
-
Nippon Models Flexes Kick-Point
N.S. Pro Zelos 6
- Low
N.S. Pro Zelos 7
R2, R, S
Low
N.S. Pro Zelos 8
R, S Low
N.S. Pro  950GH
R, SR, S, X Mid
N.S. Pro 950GH WF
R, S, X
Mid
N.S. Pro 950GH HT
R, S
Mid
N.S. Pro V90
R, S Mid
N.S. Pro 850GH
R, S
Mid
N.S. Pro 750GH Wrap Tech
R, S
Low
N.S. Pro 1050GH
R, S, X Mid
N.S. Pro 1150GH Tour
R, S, X
Mid
N.S. Pro Modus3 Tour 130
R, S, X
Mid
N.S. Pro Modus3 System 3 Tour 125
R, S, X
High
N.S. Pro Modus3 Tour 120
R, S, X, TX
High-mid
N.S. Pro Modus3 Tour 105
R, S, X
High
N.S. Pro Modus3 for T World
R, S, X
Mid
Project X Models Flexes Kick-Point
Project X 5.0(R+), 5.5(S), 6.0(S+), 6.5(X), 7.0(X+) High
Project X LZ
5.0(R+), 5.5(S), 6.0(S+), 6.5(X)
High-mid
Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now
EnglishGermanSpanish