Honma TW757 P Irons
Regular price €1.104,00
Honma continues its tradition with the TW757 P iron. This type of iron is highly valued by our players and is a frequent winner in fittings for a reason. The P is a "two piece" iron that is equipped with a lot of technology. The aim is to maximise launch and increase ball speed. The latter is achieved mainly through an extremely thin clubface. For the centre of gravity, Honma works with tungsten inserts in the sole and, in the case of long irons, also in the toe. This ensures a higher moment of inertia and more stability. The TW757 P iron goes particularly well with the in-house Vizard shafts, which are finally available again in 50g with the new 757 series. This combination has always been very popular and we are happy to offer it again. The 757 P is on the strong side in terms of lofts - which is not unusual for this type of iron. Here we recommend taking a gap wedge in addition to the pitching wedge, which rounds off the set with 48°.
As usual, you can configure the TW757 iron in many high-quality shafts at no extra charge. You can choose from the company's own Vizard shafts from 50g, the Vizard IB-WF carbon shafts, which are significantly stiffer and ensure a lower ball flight. But also the highest quality steel shafts from Nippon like the Modus, the NS Pro 950 NEO and shafts from Dynamic Gold, KBS and Project X. The best thing to do is simply contact us for a consultation.
Honma TW757 P Irons Specs and Lofts
| #4 | #5 | #6 | #7 | #8 | #9 | PW | AW | |
| Loft | 19° | 21.5° | 25° | 28.5° | 33° | 38° | 43.5° | 48° |
| Lie | 60.0° | 60.5° | 61.0° | 61.5° | 62.0° | 62.5° | 63.0° | 63.0° |
| Offset | 3.5 | 3.5 | 3.0 | 3.0 | 3.0 | 2.5 | 2.5 | 2.0 |
| Vizard 50 - Swing Weight | D0 | D0 | D0 | D0 | D0 | D0 | D0 | D1 |
| Vizard 50 - Shaft Length | 38.75" | 38.25" | 37.75" | 37.25" | 36.75" | 36.25" | 35.75" | 35.75" |
| Nippon 950 - Swing Weight | D2 | D2 | D2 | D2 | D2 | D2 | D2 | D3 |
| Nippon 950 - Shaft Length | 38.5" | 38.0" | 37.5" | 37.0" | 36.5" | 36.0" | 35.5" | 35.5" |
About Honma
With the TWorld 747, Honma has taken the first step towards the mass market. Not because the clubs are suddenly no longer produced by hand, but because for the first time a well-known professional is advertising for them and the clubs are on a par with the big manufacturers in regards to pricing. This direction is continued with the TR20.
There are no compromises in quality and the clubs are still handmade in Sakata. The irons are forged from Japanese steel which is particularly soft and gives an incomparable feeling. This makes the irons particularly flexible for fitting as well. For example, you can easily adjust the lie if the player's swing changes - and he does that regularly with amateurs.
The TR20 series is therefore a unique opportunity to enjoy the highest level of Japanese blacksmithing at a price that is also paid for industrially manufactured mass-produced goods. Also for clubs where loft, lie, length and quality of the shaft are insufficient. It's no secret that these clubs vary a lot and you may not see the difference between a 5 and 6 iron just because the loft is not absolutely accurate and the shaft is of inferior quality and incorrectly installed.
At Honma all this can't happen and especially not when you buy at ExactGolf. Because we put every single club through its paces before it gets into your hands. In the TR20 series, Honma only uses the best shafts that meet your requirements. Therefore the selection is not as big as with iron sets of big manufacturers. You can therefore be sure that the quality is top notch and thus exclude another factor that makes this beautiful game even harder than it should be.